gaqscoop.blogg.se

Turning over the board, you can see the heatsink itself. The laptop radiator and the remaining elements of the cooling system are dismantled together with the board.

After these operations, you can gently and effortlessly pull out the MacBook Pro 13 motherboard.

Additionally, you will have to dismantle the plastic cable holder from the display and pull out the microphone, which is located in a special recessed socket. There is no need to dismantle the RAM to clean the laptop, so there is no point in removing it.įurther, in order to completely disassemble the MacBook Pro 13, you will need to disconnect the cables that go to the touchpad and keyboard, as well as disconnect the battery indicator. Next, you need to disconnect the wire that goes from the display to the board and unscrew the seven screws securing the motherboard, and two to disconnect the external battery connector. The fan must be thoroughly cleaned before reinstalling. Next, you need to unscrew the three screws with an ordinary screwdriver that hold the fan in the MacBook case, having previously disconnected the wire from the fan to the laptop motherboard. In order to remove and clean the fan, you must first remove the optical drive. If desired, at this stage, the laptop hard drive can be replaced with a larger volume. Next, you need to unscrew a few screws, remove the hard drive and the speaker with a subwoofer. The only difference is the need to purchase special screwdrivers for disassembling computer equipment and a plastic spatula, which will be required for neat disassembly of the cases, since the elements in them are characterized by miniaturization. At first glance, it is even scary to touch an elegant device unnecessarily.However, like any other computer hardware, Apple MacBooks are disassembled using a set of tools and fixtures. Features of parsing MacBookĪs the people say, the eyes are afraid, but the hands do. Even one loose screw on the device case can void the warranty.Īlthough Apple's MacBook is considered a unique development in computer technology, it can be disassembled and cleaned by an ordinary person who has even a weak knowledge of the technological features of devices. If a MacBook was bought recently and is under warranty, then it is better to use the services of a service center for this, but after the manufacturer's warranty expires, it is much cheaper and more profitable to repair an expensive MacBook yourself.

The need to disassemble a MacBook most often arises when it breaks down or to clean the device. How to disassemble a MacBook for cleaning or repairing at home - tech Content: